TTS85

Productive Simultaneous Turning in new dimensions

TTS85 125 kopie
+ Main spindle
+ Control system
+ Revolver
+ Steady rest
TTS85 Arbr 2 frei
Bild 5 1 mit Korrekturebenen
Bild 2 2 frei ohne Korrekturebenen klein
TTS85 vr gesamt neu frei Seite 2

Technical details

Turning length
1.250  mm
Turning diameter
585  mm
X-axis travel
310  mm
Y-axis travel
200  mm
Z-axis travel
1.250  mm
Number of turrets
2 - 4
Bar capacity
85  mm
Spindle speed
3.400 - 4.000  rpm
Sub-spindle
 ✔
Milling integration
 ✔
Automation
 Robobox XL
Special projects
 ✔
Tool holders
 BMT45 , BMT65

Description

The TTS85 is a highly productive machine that can be expanded with two or three or four turrets for processing bar stock up to 85 mm, but also for Chuck machining up to approx. 300 mm.

A 90 degree inclined bed allows free chip flow and optimum accessibility for the operator to the work area when monitoring the process and changing tools on the turrets. The work area is generously dimensioned with a Spindle distance of 1,500 mm.

Modern SPINNER Switching turrets with Servo drive for the swivel movement and high speeds in the driven tool thanks to direct drive allow short cycle times and high-performance machining, even for large Chuck machining operations.

Variable work area configuration

Duplex

Revolveranordnung DUPLEX

In the DUPLEX version, the work area is equipped with two turrets. One turret is located at the top right and one at the bottom left of the working area.

Twin

In the TWIN version, both turrets are located at the top, which is particularly advantageous for special applications, e.g. with several Steady rests at the bottom.

Triplex

In the TRIPLEX variant, both turrets are located at the top, which is particularly advantageous for special applications, e.g. with several Steady rests at the bottom.

Quadrex

Revolveranordnung QUADREX

The QUADREX variant has FOUR independent turrets with two Y-axes and sets new standards in productivity with up to four simultaneous cutting edges on bar stock or large chuck parts up to approx. D = 300 mm.

Flexible Steady rest for precise machining

As a special feature of this series, a Steady rest can be placed on a Cross slide in the lower area of the working area. This is mounted on the X/Z slide instead of a turret and therefore enables movement in both axes within the work area. The Steady rest can follow the machining in the longitudinal direction (Z) and can also be adjusted in the transverse direction (X). In addition, it can be moved completely out of the working area to a parking position under the spindle to ensure free chip fall.

It is possible to arrange a Steady rest on the left under the Main spindle, place it mirror-inverted on the right or even use two Steady rests. This flexibility makes the machine particularly suitable for mechanical engineering, especially for machining large and long workpieces.

A CNC tailstock is also available instead of the Sub-spindle

The TTS85 offers:

  • Free chip fall
  • 85 mm Bar capacity at high speeds
  • Modern, Water-cooled motor spindles
  • CNC tailstock or Sub-spindle
  • Identical Sub-spindle of the same power possible
  • Up to two Y-axes with +- 100 mm stroke
  • Dynamic servo turret
  • Freely movable Steady rests on X/Z slides
  • State-of-the-art control systems from Siemens or Fanuc
  • Automation systems available

Simultaneous Turning – All models

Turning length
Turning diameter
X-axis travel
Y-axis travel
Z-axis travel
Number of turrets
Spindle speed
Bar capacity
Sub-spindle
Milling integration
Automation
Special projects
Grinding integration
Number of tools
B-axis
TTS42
+
TTS42
Turning length
600 mm
Turning diameter
250 mm
X-axis travel
180 mm
Y-axis travel
90 mm
Z-axis travel
688 mm
Number of turrets
2 - 3
Spindle speed
7.000 rpm
Bar capacity
42 mm
Sub-spindle
Milling integration
Automation
Robobox
Special projects
Grinding integration
Number of tools
B-axis
TTS65
+
TTS65
Turning length
600 mm
Turning diameter
250 mm
X-axis travel
180 mm
Y-axis travel
90 mm
Z-axis travel
688 mm
Number of turrets
2 - 3
Spindle speed
5.000 rpm
Bar capacity
65 mm
Sub-spindle
Milling integration
Automation
Robobox
Special projects
Grinding integration
Number of tools
B-axis
TTS85
+
TTS85
Turning length
1.250 mm
Turning diameter
585 mm
X-axis travel
310 mm
Y-axis travel
200 mm
Z-axis travel
1.250 mm
Number of turrets
2 - 4
Spindle speed
3.400 - 4.000 rpm
Bar capacity
85 mm
Sub-spindle
Milling integration
Automation
Robobox XL
Special projects
Grinding integration
Number of tools
B-axis
TTS85-XL
+
TTS85-XL
Turning length
1.850 mm
Turning diameter
585 mm
X-axis travel
310 mm
Y-axis travel
200 mm
Z-axis travel
1.850 mm
Number of turrets
2 - 4
Spindle speed
3.400 - 4.000 rpm
Bar capacity
85 mm
Sub-spindle
Milling integration
Automation
Robobox XL
Special projects
Grinding integration
Number of tools
B-axis
TTS125
+
TTS125
Turning length
1.250 mm
Turning diameter
585 mm
X-axis travel
310 mm
Y-axis travel
200 mm
Z-axis travel
1.250 mm
Number of turrets
2 - 4
Spindle speed
2.500 rpm
Bar capacity
125 mm
Sub-spindle
Milling integration
Automation
Robobox XL
Special projects
Grinding integration
Number of tools
B-axis
TTS125-XL
+
TTS125-XL
Turning length
1.850 mm
Turning diameter
585 mm
X-axis travel
310 mm
Y-axis travel
200 mm
Z-axis travel
1.850 mm
Number of turrets
2 - 4
Spindle speed
2.500 rpm
Bar capacity
125 mm
Sub-spindle
Milling integration
Automation
Robobox XL
Special projects
Grinding integration
Number of tools
B-axis
Microturn Universal 2-S
+
Microturn Universal 2-S
Turning length
250 mm
Turning diameter
150 mm
X-axis travel
600 mm
Y-axis travel
100 mm
Z-axis travel
350 mm
Number of turrets
2
Spindle speed
5.200 - 10.000 rpm
Bar capacity
36 - 52 mm
Sub-spindle
Milling integration
Automation
Robobox
Special projects
Grinding integration
Number of tools
33 - 72
B-axis