+49 (0) 8104 / 803-0

TC800-110-MC Siemens

New Stock TC800-110-MC Siemens
Serie:

TC - Universal Turning

Modello:

TC800-110-MC

Disponibile da:

immediately - on stock

Anno di costruzione:

2022

Controllo:

Siemens 840DE SolutionLine

Località:

main Factory Sauerlach

Stato:

new

Numero di riferimento:

8043813

Opzioni:

FREE FROM EXPORT ORDER:

Universallathe SPINNER TC according to following configuration:

Approx delivery time 1 Week

TC800 BASIC MACHINE with strokes X=360mm Z=900mm
in 45 degree inclined bed design
with hardened and ground slideways

equipped as a SINGLE-SPINDLE-TURNING MACHINE with turret
WITH driven tools
in TCXXX-MC version

INDEXING TURRET - WITH driven tool stations
all tool stations can be driven on the inner circle of turret disk. If one circle all posiitons can be with live tools
only the station in working position is driven
designed as servo turret
Swivel speed as adjustable CNC axis with feed potentiometer

Tool holder on turret system DIN 69880 / DIN ISO 10889, size VDI50
AXIAL ARRANGEMENT at the front of the turret

Number of tool stations in the turret: 12

SPINDLE 1 in version up to 2,600 rpm - 110mm
As belt-driven spindle with 2-speed gear unit
with hollow shaft measuring systems mounted directly on spindle shaft for C-axis operation
with hydraulic hollow clamping cylinder, bar passage 110mm,
Speed range 0-2,600 rpm , Pmax 63 kW / 2250Nm
Spindle nose DIN55026/A11

POWER CHUCK by SMW-Autoblok
D=315mm 3-jaw, BBD model
incl. adapter flange, draw tube adapter, set of soft jaws mounted on main spindle

Set of hardened TOP JAWS suitable for chuck on main spindle

TAILSTOCK can be towed in the program by coupling to Z-axis, hydraulically clamped to the bed. With

additional integrated hydraulic quill and bearing for fixed tip.
Hydraulically adjustable contact pressure.

Version with SIEMENS control with the following features:
Attention: Siemens general conditions for softwareproducts are valid:
www.sw.siemens.com/en-US/sw-terms/base/eula/

SIEMENS 840DE control system with the following basic scope:
- SPINNER - SPIOS 24" Touch Control Panel for I4.0 applications
- Height-adjustable, rotatable and tiltable control panel for optimum ergonomics
- incl. engraving cycles
- 24" liquid crystal colour flat panel display with Multi touch functionality
- User memory 2 GByte
- 15 zero offsets
- 1 free USB interface
- Standard Ethernet interface

PRIMARY LANGUAGE: Russian

SECOND LANGUAGE: German

MULTI-FUNCTION CONTROL HANDSET with integrated display
to display
- position of the active axis
- active increment
- spindle speed
- current feed
and the following integrated operating functions:
- NC start/stop, spindle start/stop, feed start/stop
- axis selection keys
- direction keys/ rapid traverse superimposition
- reset/Single block
- feed rate override

SHOPTURN work step programming
Attention: Linear tooling ahead turning center (Microturn behind spindle-center)  are not
supported by "Shop-Turn" graphics. They have to be programmed in DIN system within Shop-
Turn environment.

3D SIMULATION of finished parts

RESIDUAL MATERIAL DETECTION
and machining of contour pockets

SIMULTANEOUS RECORDING of the machining process

SIGNAL LAMP on top of the machine in three colors red / yellow / green as a status indicator
Functions:
Red: machine alarm
Yellow: End of part program / end of bar / parts pallet empty
Green: The program is running in automatic mode

CHIP CONVEYOR
as hinged belt conveyor exiting to the right, incl. integrated coolant tank and
feed pump. Universal design variant

Rinsing gun in working area

MEASURING PROBE for tool measurement in the working area incl. quick-change coupling

The probe can be used for setup operation in the working area to
measure the tools in X/Z direction.
Attention: Collision considerations with turrets can lead to restrictions depending on the
design of the tools on the disc.
Version for standard chuck sizes

UNIMAG interface for bar-loading magazine

STANDARD DOCUMENTATION IN GERMAN
consisting of machine manual and CNC manuals
is supplied in digital form on the control. Paper manuals subject to additional charge

STANDARD PAINTWORK two colours in light grey RAL7035 and blue grey RAL5008

EUROPA-STANDARD electrical version as follows:

Operating voltage 3x400V +/-10%

Mains frequency 50Hz (+/-2%)

TN network (5-wire)

PACKAGING screwed onto wooden planks with plastic hood, unsealed,
without special seaworthy preservation, recommended for direct door-to-door transport for up to 4 days
on a dry HGV. Disposal return of empties against carriage paid delivery to the
supplier's works.

ATTENTION: The product is a ZERO GOOD and is CURRENTLY NOT recognised from the
export list. When exporting to third countries, it may nevertheless be subject to approval
by the German authorities BAFA depending on the buyer in the third country. As a precaution we point this out to the
buyer and they undertake to observe the applicable
export control regulations when reselling/delivering and notify other future buyers
of this.  In addition, we would like to draw the attention of buyers in third countries
to the fact that a delivery obligation is only entered into by us subject to examination by the end user
after receipt of the necessary end-use declarations for our documents.

+ BIG PACKAGE OF TOOLDERS, MILLING-HEADS AND ACESSORIES.

Informazioni aggiuntive:

Pictures don't show actual machine and equipment

Prezzo:

starting at 191.332 €